Have you ever had the drawstring on your hoodie slip out accidentally, making the clothes unsightly and difficult to adjust? Don’t worry, today we will work together to get that naughty drawstring back to where it should be with a few household items and a few simple steps.
What do you need to prepare?
- Plastic straws
- Stapler
- Drawstring
- Thin needle or toothpick (as an auxiliary tool)
Replacing hoodie drawstrings
If your hat rope is lost, worn, or you just want to replace it with a more unique hat rope, the best way is to buy some new ones. Wirwear drawcord official website sells a variety of high-quality drawcords. It is a professional drawstring manufacturer. You can choose and buy with confidence.
How do I put the drawstring back on my hoodie?
Step 1: Insert the straw
Take a 1-inch straw and aim one end of the straw at one of the holes in the drawstring and slowly insert it. It is best to use a plastic straw rather than a metal or hard plastic reusable straw. If you have trouble inserting it, you can try to gently twist the straw or use a thin needle or toothpick to help.
Step 2: Secure the straw
Use a staple to secure the rope once so that the two are firmly connected together to prevent them from coming apart during insertion.
Step 3: Insert the eyelet
The next step is to insert the straw into the eyelet of the hat. Pinch the fabric to pass the straw through the eyelet. Continue to pinch and straighten the fabric while holding the straw and pass the rope through the hoodie. Repeat this operation until the straw reaches the hole on the other side of the hoodie.
Step 4: Remove the straw
Once the other end of the drawstring has successfully passed through the other end of the straw, you can start to remove the straw. After removing the staple, slowly pull the straw outward.
What other methods are there?
1. Use a bent wire hanger
- Find a wire hanger, bend the straight end to form a small curve, and pass the drawstring through the curve and out the other side. Finally, take the hanger out and the drawstring will be in the hole. Just tidy it up!
- This method takes advantage of the plasticity and rigidity of the wire hanger and cleverly solves the problem of getting the drawstring back into place.
2. Use a safety pin
- Thread the drawstring into the pin, and then pass the pin through the small hole in the clothes. Take the pin out on the other side and the drawstring will follow. Tidy up the drawstring and you’re done!
- You can buy safety pins from craft stores or hobby stores.
3. Use a round pen
- If you can’t find a safety pin, straw, or hanger, you can find a pen with a pocket clip and wrap the drawstring around the clip. Then slide the other end of the pen through the pen holder. Feel the pen pass through the fabric and pull it through the pen holder until the pen and drawstring come out of the other end.
- Make sure you use a pen with a pocket clip so that the drawstring can be secured and does not fall off easily.